Wall decoration: Letters
Create a wall decoration using TroGlass and wall distance holders.
- 3 pcs. TroGlass in different colors
- Distance holders R15-15-FL
- Speedy 400
- 120 watts
- 2" lens
- vacuum table with acrylic cutting grid table
Of course, this pattern can also be copied with all other machines of the Speedy laser engraver series.
Step by step
Step 1: Import the graphic file
Import our template and adapt it to your requirements. Send each of the jobs to the laser using the driver settings below.
|Process mode||Resolution||Cut line|
|Color||Optimized Geometries, inner geometries first|
Steps 2: Laser process
The laser parameters may vary depending on the type of laser machine and available laser power.
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
Step 3: Assembly
With the back plate mark the drill holes in your wall. After that place the plate to the wall and fix it with the distance holders to the wall. Now add the colored acrylic letters to the distance holders and secure them with an Allen key. That's how easy it is to make this individual wall decoration with distance holders.
Try different sizes, materials and fonts. There is no limit to your creativity.