Laser engraved trophy label made of TroLase Foil

Learn how you can make an individual trophy sticker with a Speedy flexx and TroLase foil.

trolase foil laser engraving

Preparation

Required material
Machine used
  • Speedy 360 flexx, 80/30 Watt
  • 2.85" lens
  • Vacuum table and honeycomb cutting table

You can produce this sample with any machine of the Speedy family (no fiber laser required).

Tips

We engraved this sample with the fiber laser, because the design is extremely intricate. Due to the smaller spot size of the fiber laser, we achieve better results. This works only on metallic TroLase foils (silver matt, silver brushed, gold, copper).

With the CO2 laser you can process all TroLase foil materials.

Trophy Label

ZIP

Download now

Step by Step

Step 1

Step 1: Import design

Make your own design or import our template. Adapt it to the size of your trophy if necessary. Then send the job to the laser using the driver settings below:

Process mode Resolution Cut line Halftone Others
Standard 1000 dpi None Color -

Info: When engraving with the fiber laser, always use 1000 dpi resolution. It works best in combination with the small spot size of the fiber laser.

Step 2

Step 2: Laser process label

Put the TroLase foil into your laser and focus on the material. Then make the parameter settings. Our settings can vary depending on laser machine and laser power available.

Laser Parameters Engraving:

Color Process Power (%) Speed (%) ppi/Hz
Black Engrave FLP 20 55 30,000
Passes Air Assist Z-Offset Advanced
1 on 0mm -

Laser Parameters Scratching:

Color Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 8 1 1000
Passes Air Assist Z-Offset Advanced
1 On 4 mm -

Laser Parameters Kiss-cut:

Color   Process Power (%) Speed (%) ppi/Hz
Blue Cut CO2 9 1 1,000
Passes Air Assist Z-Offset Advanced
1 On - -

Laser Parameters Cutting:

Color Process: Power (%) Speed (%) ppi/Hz
Green Cut CO2 40 2 1,000
Passes Air Assist Z-Offset Advanced
1 On - -

Info:

The advantage of the fiber laser is the smaller spot size. Therefore less heat is applied on the material. The foil remains flat and does not bend.

Step 3

Step 3: Cleaning

Clean the label with a damp cloth. This works best inside the engraving cabinet with activated exhaust.

Inspiration

TroLase Foil is available in many colors. Browse our webshop and be inspired for your next application.

TroLase Foil can also be used for exterior use like mailbox labels or door bell name plates.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.