Oplev vores lasere i aktion!
Lasergraverer og laserskærer
Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
| ⚫ Graver | ⚫ Skær | ⚫ Mærk |
| Lasertype: | CO₂, Fiber eller Flexx laser |
|---|---|
| Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
| Arbejdsemnets maks. højde: | 125 - 305 mm |
| Lasereffekt: | 10 - 120 watt |
Laserskæringsmaskine i stort format
SP-serien: CO2-laserskærer til materialer i stort format.
| ⚫ Graver | ⚫ Skær | ⎯ Mærk |
| Lasertype: | CO₂ laser |
|---|---|
| Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
| Arbejdsemnets maks. højde: | 50 - 112 mm |
| Lasereffekt: | 40 - 400 watt |
Industriel mærkningslaser
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
| ⚫ Graver | ⎯ Skær | ⚫ Mærk |
| Lasertype: | CO₂ eller Fiber laser |
|---|---|
| Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
| Arbejdsemnets maks. højde: | 250 - 764 mm |
| Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
How to create
a laser-ready design in Adobe Illustrator®
Alternatives to CorelDraw®
Again and again we are asked the question: “Do I really need to work with CorelDraw®? I’d much rather edit my designs in another program, such as Adobe Illustrator®.” The answer? No problem. Use this guide to determine the optimal settings.
Guide to the optimal settings
Select the following settings right at the beginning to make sure that the laser can interpret the graphics information correctly.
Trin for trin
Step 1: RGB color space
Step 3: Continue to the print dialog
Now your design is ready, and you want to send it to the laser. Just like CorelDraw®, Adobe Illustrator® also communicates with the laser via the printing dialog.
Click on “Print”, and the Adobe Illustrator® print window opens. In section “Output," make sure that RGB has been selected as the color space.
Then click on “Setup," and the classic print dialog opens.
Step 4: Select Trotec Engraver and enter laser parameters
Now select the Trotec Engraver, and in “Preferences” or “Settings” you can adjust the laser settings. When you are finished, click “Print," and you will be automatically redirected to JobControl®.
Step 5: JobControl®
In the JobControl® window, you will see the plate, and you can select your current job (or older jobs if so desired) from the menu on the right and place it anywhere on the plate.
For more information about JobControl®, please see here.
Further information
Contact the Trotec service hotline where top qualified and motivated laser experts will assist you with any questions or problems.