Personlig juledekoration

Trinvis vejledning

christmas boot laser cut from felt

There are numerous creative laser ideas for the Advent season: Surprise your loved ones with a Christmas boot cut with the laser from leather and felt, filled with Christmas delicacies.

Forberedelse

Required material
  • red polyesterfelt, approx 4mm
  • white Alcantara leather
  • green wool, approx. 2 mm thick
Used Trotec Laser
Tips

We recommend the use of 100% polyester felt as it is especially suited for processing with the laser.

Textile Christmas Boot

PDF

Download nu
Christmas Felt Boot

ZIP

Download nu

Trin for trin

Step 1

Step 1:

Open the file "Christmas boot" and send it to the laser. The boot is made from two different materials; we have started with the red boot. The red felt is engraved and cut.

LASER SETTINGS

  • Engraving (black) - Power: 20 %, speed: 50 %, resolution: 500 ppi
  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz

The parameters depend on the used machine and the available laser power; they might therefore vary.

Step 2

Step 2:

Next, we laser cut the brim of the boot.

LASER SETTINGS

  • Cutting (red) - Power: 65 %,  speed: 3 %, resolution: 1000 Hz.

The parameters depend on the used machine and the available laser power; they might therefore vary.

Step 3

Step 3:

Now all you need is a thick wool thread to stitch the different parts together.

Inspiration

Du kan nemt producere støvlerne på forhånd og tilpasse dem med navnene efter behov. 

Speedy-serien
Den ideelle lasergraver og -skærer til personlig tilpasning.

Oplev lasergraverere- og -skærere

Har du spørgsmål til anvendelser eller indstillinger?
Vi rådgiver dig gerne fra A for Air assist til Z for z-forskydning.

Anmod om flere oplysninger.

Stolt medlem af troGROUP Logo