--------------------------
  1. Trotec Laser
  2. Naučite i podržite
  3. Laserski projekti
  4. Lasercut felt easter decoration

Lasercut felt
easter decoration

Step by step guide

felt easternest laser cutting

Priprema

Required material
  • Felt in any color with 622 g/m²
  • some ribbon
Used Trotec Laser
  • Speedy 400
  • 80 watts
  • 2.0 inch lens

Detaljni vodič

sr Semenke smeđeg lana
Korak 1

Step 1: Design and text

We designed an Easter basket and filled the remaining felt with Easter eggs for hanging, making the most out of the material. You can also personalize the Easter basket with the name of the person you want to give it and make the decoration out of various colors of felt. If you don't want the Easter eggs for hanging, you can create other decorations like napkin rings or flowers to maximize the material use... Feel free to be creative!
sr Semenke smeđeg lana
Korak 2

Step 2: Laser Settings

Send the file with your personalized Easter elements to the laser.

We have worked with a Speedy 400 with 80 watts laser power and used the following parameters:

  • Engraving: Power: 33% - Speed: 50% - Frequency: 500 ppi - Air Assist: ON - High Quality
  • Cutting: Power: 40% - Speed: 2% - Frequency: 1000 Hz - Air Assist: ON
  • Cutting-in: Power: 10% - Speed: 2% - Frequency: 1000 Hz - Air Assist: ON
It only takes two minutes to make these with the laser!
sr Semenke smeđeg lana
Korak 3

Step 3: Tie it together

When the laser is finished, remove the material from the laser, tie the basket with a ribbon together at each end, and attach ribbons to the hanging decoration.
sr Semenke smeđeg lana
Korak 4

Step 4: Decorate and make presents!

Use these items to decorate your home, your office, or fill the baskets with eggs and candy to make someone an Easter present.
sr Semenke smeđeg lana
Korak 5

Tips:

  • Weight the felt in your laser and use the Air Assistent that the felt is flat.
  • If you use a Speedy 300 flexx with 80 watts you should raise the power up to 45% and use a 2.5 inch lens.
  • You can also cut and engrave Easter decorations out of wood and with the Speedmarker GS you can engrave colored Easter eggs in just a few seconds!
sr Semenke smeđeg lana
Korak 6

That could be also interesting:

We designed an Easter egg with ornaments and the German wish "Frohe Ostern" for "Happy Easter". You can write other sayings, or the name of the person who you want to give this wooden decoration as an Easter present. Feel free to change the template which we've uploaded for you. Get more Information

Priprema

Required material
  • 4 mm polyesterfelt in any color
  • some ribbon
Used Trotec Laser
  • Speedy 400
  • 80 watts
  • 2.0 inch lens
felt-easter-craft-JC.zip

ZIP

Preuzmite odmah
csm_felt-easter-craft_fc836e5b4b.png

PDF

Preuzmite odmah

Detaljni vodič

felt easter decoration laser cut
Korak 1

Step 1: Design and text

We designed an Easter basket and filled the remaining felt with Easter eggs for hanging, making the most out of the material. You can also personalize the Easter basket with the name of the person you want to give it and make the decoration out of various colors of felt. If you don't want the Easter eggs for hanging, you can create other decorations like napkin rings or flowers to maximize the material use... Feel free to be creative!

felt easter decoration
Korak 2

Step 2: Laser Settings

Send the file with your personalized Easter elements to the laser.

We have worked with a Speedy 400 with 80 watts laser power and used the following parameters:

  • Engraving: Power: 33% - Speed: 50% - Frequency: 500 ppi - Air Assist: ON - Advanced: Optimized Quality
  • Cutting: Power: 40% - Speed: 2% - Frequency: 1000 Hz - Air Assist: ON
  • Cutting-in: Power: 10% - Speed: 2% - Frequency: 1000 Hz - Air Assist: ON

It only takes two minutes to make these with the laser!

textile easternest laser cut
Korak 3

Step 3: Tie it together

When the laser is finished, remove the material from the laser, tie the basket with a ribbon together at each end, and attach ribbons to the hanging decoration.

felt laser cutting easter
Korak 4

Step 4: Decorate and make presents!

Use these items to decorate your home, your office, or fill the baskets with eggs and candy to make someone an Easter present.

felt easternest laser cutting
Korak 5

Tips:

  • Weight the felt in your laser and use the Vacuum that the felt is flat.
  • You can also cut and engrave Easter decorations out of wood and with the Trotec laser GS you can engrave colored Easter eggs in just a few seconds!
wooden ornament laser cutting
Korak 6

That could be also interesting:

We designed an Easter egg with ornaments and the German wish "Frohe Ostern" for "Happy Easter".

You can write other sayings, or the name of the person who you want to give this wooden decoration as an Easter present. Feel free to change the template which we've uploaded for you.

Get more Information

Serija Speedy
 Idealan laserski graver i sekač za personalizaciju.

Otkrijte laserske gravere i sekače

Da li imate pitanja o aplikacijama ili podešavanjima?
Drago nam je što možemo da vam pružimo detaljne savete, od Air Assist-a do z-pomaka.

Kontaktirajte nas
Ponosni član troGROUP Logo