Isprobajte naše lasere u akciji!
Mašine za lasersko graviranje i sečenje
Speedy serije: CO2 mašine za lasersko graviranje i sečenje za formate do 1016 x 610 mm
| ⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂, Flexx ili Fiber laser |
|---|---|
| Radna površina: | 610 x 305 do 1016 x 610 mm |
| Maks. visina predmeta: | 125 - 305 mm |
| Snaga lasera: | 20 - 120 W |
Mašina za lasersko sečenje velikih formata
SP serije: CO₂ mašine za lasersko sečenje za materijale velikog formata.
| ⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
| Tip lasera: | CO₂ laser |
|---|---|
| Radna površina: | 1245 x 710 do 3250 x 3210 mm |
| Maks. visina predmeta: | 50 - 112 mm |
| Snaga lasera: | 40 - 400 W |
Industrijski laser za obeležavanje
SpeedMarker serije: Industrijsko, brzo lasersko obeležavanje za označavanje metala i plastike.
| ⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
| Tip lasera: | CO₂ ili Fiber laser |
|---|---|
| Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
| Maks. visina predmeta: | 250 - 764 mm |
| Snaga lasera: | 20 - 100 W/20W MOPA |
Two steps to a finished data plate with serial number
In this example, the data plate consists of two elements: the graphic file with the fixed content and the extension with the serial number. First, import the graphic file.
Step 1:
Upload the graphic file (bmp file) by clicking the "bmp" icon. (Note: you can also use all other common graphic files). Now you can find the desired graphic in the graphic field.
Step 2:
After the import, the data plate layout is displayed in the middle of the graphic field. Depending on requirements, you can freely move this within the marking area (for example to mark multiple data plates at once).
Adding the serial number
Each machine has its own data plate with its own unique serial number. The SpeedMark marking software does this automatically for you.
Step 1:
Add a text field in the flowchart (see picture) and select "Serial number" for source.
Step 2:
A selection field will appear, where you can specify how the serial number should look. Create your combination of text and the number of digits.
Thereby, you have created the data plates.
Step 3:
Finally, select the laser parameters in the parameter database (for details, see Tips & Tricks "SpeedMark Laser Parameters"), insert the material and engrave the data plates. Detailed instructions can be found in the tutorial.
Still looking for engraving material for your data plates?
Find anodized aluminum in our Webshop!
Trotec locations in your area
Have questions about creating data plates or automating the import of serial numbers?
Visit us at our one of our 70 locations or one of our 110 distribution partners worldwide.