Unique Christmas tree with decorations

Step by Step instruction

This unique Christmas tree is an eye-catcher for a lobby, shops or in your home. (Find engraving materials for this and other applications at: www.trotec-materials.com.)


Required material
  • 3 sheets of 3mm TroGlass 1200mm x 600mm (Any color can be used. For the decoration you can use remaining material) 
  • String or fishing line to hang decorations
Machine used
  • SP500
  • 60 Watt
  • 3.75" lens
  • Slat cutting table or Acrylic cutting grid table

For this sample we recommend using any laser machine from the SP laser cutter series.


Each laser machine is unique, so you may have to adjust the slots to suit the lens you are using to get a nice friction fit.



Unduh sekarang


Unduh sekarang

Langkah demi Langkah

Langkah 1

Step 1: Import /create design template

Make your own design or import our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Print settings:

Process mode Resolution Cut line
Standard 500 dpi None
Halftone Others
Black & White Enhanced Geometries Inner - Geometries First
Langkah 2

Step 2: Laser process

Position the material into your laser and cover the rest of the table to increase the exhaust power. You will need 6 side parts (2 on each sheet) and 4 disks. Remove the protective foil after the cutting is complete.

Laser Parameters:

Color Process Power (%) Speed (%) ppi/Hz
red Cutting CO2 100% 0.65 10,000
Passes Air Assist Z-Offset Advanced
1 on - -


The material parameters of JobControl can be downloaded from www.troteclaser.com

Langkah 3

Step 3: Post-processing

To assemble the Christmas tree, friction fit each section into the discs. Place the largest disc at the base. Note: the disc at the top of the tree is the one with two extra slots for securing the star on top of the tree.



Now you can put your ornaments on the tree. Or you can decorate it with individually produced TroGlass ornaments. Scroll down to the end of the page to view a large selection of designs.

Seri Speedy
Pengukir dan pemotong laser yang ideal untuk personalisasi.

Temukan pengukir dan pemotong laser

Pertanyaan tentang aplikasi atau pengaturan?
Kami dengan senang hati akan memberikan saran kepada Anda mulai dari A untuk Air Assist hingga Z untuk z-offset.

Hubungi kami
Anggota kebanggaan troGROUP Logo