--------------------------
  1. Laser Trotec
  2. Pelajari & Dukungan
  3. Proyek laser
  4. Catalogue cover

Unique catalogue cover of LaserPaper

See how you can produce valuable catalogue covers, brochures or other printed items using LaserPaper Wood.

laser-process-paper

Persiapan

Required material
Machine used
  • Speedy 360
  • 120 Watt
  • 2" lens
  • aluminum cutting grid table or honeycomb table

For this sample you can use any laser machine from the Speedy laser engraver series.

Important
  • For the inner part, use paper with at least 150 g/m² to secure sufficient volume of the finished item
  • Make sure that "Send Beziers and paths to driver" is activated in your software. Otherwise the registration marks are not recognized by JobControl® Vision.
Catalogue Cover

ZIP

Unduh sekarang

Langkah demi Langkah

laser-engrave-individual-catalogue
Langkah 1

Step 1: Make design layout

Make your own design and adapt it to your needs. Print your design on the LaserPaper Wood or forward it to your trusted printer.
Because this sample is being engraved and cut, we put a hair cross in the middle of the print file instead of registration marks. This hair cross helps you to position the job precisely.

Send the graphic for the outer shell to the laser using the settings below:

Print settings:

Process mode Resolution Cut line
Standard 500 dpi none
Halftone Others
Colors enhanced geometries, inner geometries first
laser-process-paper
Langkah 2

Step 2: Laser process

Adjust the parameter settings. The parameters can differ depending on the laser machine used and laser power available.

Tip:

Change the order of the colors in JobControl from red to blue so that the material is scratched first and cut second.

Laser parameters:

Color Process Power (%) Speed (%) ppi/Hz
black Engraving CO2 20 50 500
red Engraving CO2 12 1.5 1000
blue Cutting CO2 5 1.5 1000
Passes Air Assist Z-Offset Advanced
1 on +2.5 mm -
1 on - -
1 on +2 mm -
laser-paper-wood-catalogue-cover
Langkah 3

Step 3: Post-processing

Take the cover out of your laser and insert the core of the catalogue. Or if you are using a commercial printer, forward the cut-out cover to your printing representative to attach it to the catalogue.

laser engraving machine applications

Inspirations

Due to the wood grain, colored prints also look great on this material. There are no limits to your creativity.

Seri Speedy
 Pengukir dan pemotong laser yang ideal untuk personalisasi.

Temukan pengukir dan pemotong laser

Pertanyaan tentang aplikasi atau pengaturan?
Kami dengan senang hati akan memberikan saran kepada Anda mulai dari A untuk Air Assist hingga Z untuk z-offset.

Hubungi kami
Anggota kebanggaan troGROUP Logo