Aimants pour réfrigérateur à faire soi-même

Créez votre propre lot d’aimants pour réfrigérateur à l’aide de nos instructions et de notre gabarit de découpe laser.

Découpe laser de film magnétique

Préparation

Required material
  • 1x sheet of TroLase Thins - white
  • Magnetic adhesive backing
Used Trotec Laser
  • Speedy300
  • 80 watts
  • 2 inch lens
Tips
  • If you're having trouble finding the perfect cutting parameters, you may want to refresh your memory by reading through the following pages:

Laser Parameters

How do I determine the optimal laser parameters?

Étape par étape

Étape 1

Step 1: Magnets made from laserfoil laminate

Open the graphics file (found at the bottom of this page). This will then need to be printed on your chosen material in whatever way you decide (UV printing, standard printing, etc). We decided to use TroLase Digital Print as an example product. It’s a great choice for this application as the material is designed to be printed on.

Alternatively, you can engrave the graphics onto your material instead of printing. We find the results are a lot more eye-catching when printed in colour, but if your laser machine allows it you can engrave the monsters instead. If you decide on this option, use the following laser parameters. Please note that these settings may vary depending on the laser machine and material you are using.

Recommended laser parameters:

Color Process  Power (%) Speed (%) ppi/Hz
Black Engrave CO2 40 100 600
Passes Air Assist Z-Offset Advanced
1 ON +1,5mm High quality
découpe laser magnets réfrigérateur
Étape 2

Step 2: Cutting your Magnets (JobControl Vision Necessary)

Once your material is prepped and ready for cutting, place it inside your laser machine. This file already has all the registration marks needed to make the software work. Once the material is in the machine, open the cutting file in JobControl Vision and send it to the laser machine using the following laser parameters.

Please note that these cutting settings may also change depending on what laser machine and material you are using.

Recommended laser parameters:

Color Process  Power (%) Speed (%) ppi/Hz
Red Cut CO2 32 0,8 5000
Passes Air Assist Z-Offset Advanced
1 ON - -

Série Speedy
La machine de gravure et de découpe laser idéale pour la personnalisation.

Découvrez les machines de gravure et de découpe laser

Des questions à propos des applications ou réglages ?
Nous vous conseillerons volontiers de A pour assistance d'air à Z pour offset Z.

Contactez-nous
Fier membre du troGROUP Logo