Etiqueta de identificación de aluminio anodizado con marcado negro y MOPA
Aprenda cómo hacer marcados negros en aluminio anodizado con un láser MOPA, usando este distintivo de nombre como inspiración.
Preparación
Required material
- anodized aluminum
- magnet
Machine used
- SpeedMarker 700
- 20 W MOPA laser
- F254 lens
You can use any other machine of the SpeedMarker series, Speedy fiber or Speedy flexx.
Important
You might need other parameters when marking glossy aluminum.
Creating a black marking is only possible with the MOPA laser. This is the only laser that colors anodized aluminum black through short pulsing. The conventional fiber lasers in the SpeedMarker Series, Speedy Flexx or Speedy Fiber Laser, can only create white marking.
Paso a paso

Step 1: Design
Import our template or create your own design. Import the PDF with layers into SpeedMark and assign parameters and fillings to the object.
Important: If texts are imported from a PDF, they have to be converted into curves before. Otherwise SpeedMark Software does not recognize them as Text. Alternatively, you can produce the text directly in SpeedMark.
Filling for | Fill style | Line distance [mm] |
---|---|---|
Logo | cross lines (bidirectional) | 0.03 |
Name | Bidirectional | 0.001 |
Title | Bidirectional | 0.001 |

Step 2: Laser process
Now enter the parameter settings. They can differ depending on the laser machine used and laser power available.
Laser parameter | Process | Power [%] | Speed [mm/s] |
---|---|---|---|
Logo | Marking | 50 | 2000 |
Name | Marking | 50 | 1500 |
Title | Marking | 50 | 1500 |
Laser parameter | Frequency [kHz] | Pulse width [ns] | Passes |
---|---|---|---|
Logo | 60 | 100 | 1 |
Name | 200 | 8 | 1 |
Title | 200 | 100 | 1 |

Step 3: Post processing
Fix the magnet on the back of the nametag.
Preparación
Material necesario
- Aluminio anodizado
- Un imán
Máquina usada
- SpeedMarker 700
- Láser MOPA 20 W
- Lente F254
Se puede usar cualquier otra máquina de la serie SpeedMarker, Speedy fiber o Speedy flexx.
A tener en cuenta
Es posible que necesite otros parámetros si el aluminio del que dispone es brillante.
Para lograr diferentes colores hay que cambiar la duranción del pulso. Por tanto, con un láser que no sea tipo MOPA solo conseguirá hacer marcas negras sobre el aluminio. El láser tipo MOPA está disponible sólo para la serie SpeedMarker.
Con los láseres de la serie Speedy fiber o Speedy Flexx podrá marcar el aluminio en negro, pero no a color.
Paso a paso

Paso 1: Diseño
Importe nuestra plantilla o cree su propio diseño. Importe el PDF con capas al SpeedMark y asigne parámetros y rellenos al objeto.
Importante: Si los textos se importan desde un PDF, antes deben ser convertidos a curvas. De lo contrario, el software SpeedMark no los reconocerá como texto. También puede crear el texto directamente en el software SpeedMark.
Llenado para | Estilo de llenado | Distancia entre líneas [mm] |
---|---|---|
Logotipo | líneas cruzadas (bidireccional) | 0,03 |
Nombre | Bidireccional | 0,001 |
Título | Bidireccional | 0,001 |

Paso 2: Procesamiento con láser
Ajustes los parámetros del láser siguiendo las especificaciones de la tabla de más abajo.
Estos parámetors pueden diferir dependiendo de la máquina láser y de la potencia de que disponga.
Parámetro del láser | Proceso | Potencia [%] | Velocidad [mm/s] |
---|---|---|---|
Logotipo | Marcado | 50 | 2000 |
Nombre | Marcado | 50 | 1500 |
Título | Marcado | 50 | 1500 |
Parámetro del láser | Frecuencia [kHz] | Ancho de pulso [ns] | Pasadas |
---|---|---|---|
Logotipo | 60 | 100 | 1 |
Nombre | 200 | 8 | 1 |
Título | 200 | 100 | 1 |

Paso 3: Posprocesamiento
Sujete el imán a la parte posterior de la placa de identificación.
Un poco de inspiración
Pruebe diferentes colores de aluminio anodizado y tamaños para agregar otro elemento a su oferta.