Personalized agate pendant

Step by step instruction

Learn how you can engrave a piece of agate with your Trotec laser.


Required material
  • Agate disks
  • Leather band
Machine used
  • Speedy 360, 100 Watt
  • 1.5" lens
  • Vacuum table

For this sample you can use any laser machine from the Speedy laser engraver series.


We used the 1.5" lens for this sample because we wanted to engrave a filigree design.

Agate Pendant Parameters


Download now
Agate Pendant Lasameter


Download now

Step by step

Step 1

Step 1: Import design

Make your own design or import our template. We scanned our agate disk to adapt our design directly to the shape of the stone. Send the job to the laser using the driver settings below.

Print settings

Process mode Resolution Cut line
Standard 1000 dpi none
Halftone Others


For a perfect result of our detailed graphics we used the highest possible resolution of 1000 dpi for our engraving job.

Step 2

Step 2: Engraving the agate

Position the agate disk into your Trotec Laser and focus on the surface. If the stone is rounded, focus on the average value of the engraving area. Make the material parameter settings. The parameters can vary depending on laser machine and available laser power.

Laser Parameters engraving

Color Process Power (%) Speed (%) ppi/Hz
black Engrave CO2 50 30 1000
Passes Air Assist Z-Offset Advanced
1 on + 1.5 mm high quality


Due to the +1.5 mm z-offset (out of focus) the contrast is higher than engraving in focus.

Step 3

Step 3: Post-processing and assembly

The pendant does not have to be cleaned after engraving. Add a leather band or a pin and your personalized agate pendant is ready.



Logos, aphorisms or congratulations: With a little creativity you can fulfil almost any customer request.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo