--------------------------

Christmas Baubles Made from Trotec Materials

Use a selection of Trotec materials to create Christmas baubles

Preparation

These decorations can be produced with any Speedy laser engraving machine.
csm_Chistmas_Decoration_3751a55371.png

PDF

Download now

Step by step

Applications

Tips

1. When processing TroGlass Mirror and woods, a masking tape can be applied to the material surface. This reduces the risk of scratches and flashback for TroGlass Mirror, while the masking tape minimizes sap leakage onto woods

2. If processing TroGlass Mirror with adhesive backing, multiple passes are needed to engrave, firstly through the adhesive and secondly to engrave the material. We recommend a higher laser power for this 

3. For best results when processing acrylic, raise the material off the laser bed, or leave the protective coverings on to minimise flaming

4. To achieve best results when processing foils, low power and fast speed should be used

5. Remember to invert the design when processing TroGlass Mirror

Assembly:

Once all elements are laser cut and engraved, the self-adhesive backing can be removed and the pieces affixed. Take care with this process as the adhesive is difficult to remove when applied. 

As foils are delicate materials, take extra care when removing the backing to not damage the material. 

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo