Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Create a wall decoration using TroGlass and wall distance holders.
Of course, this pattern can also be copied with all other machines of the Speedy laser engraver series.
Import our template and adapt it to your requirements. Send each of the jobs to the laser using the driver settings below.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500dpi | none |
Halftone | Others |
---|---|
Color | Optimized Geometries, inner geometries first |
The laser parameters may vary depending on the type of laser machine and available laser power.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
red | Cut CO2 | 100 | 1,2 | 5000 |
Passes | Air Assist | Z-Offset | Direction | Advanced |
---|---|---|---|---|
1 | ON | - | - | - |
With the back plate mark the drill holes in your wall. After that place the plate to the wall and fix it with the distance holders to the wall. Now add the colored acrylic letters to the distance holders and secure them with an Allen key. That's how easy it is to make this individual wall decoration with distance holders.