See our lasers in action!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 610 x 305 up to 1016 x 610 mm |
| Max. workpiece height: | 125 - 305 mm |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 1245 x 710 up to 2210 x 3210 mm |
| Max. workpiece height: | 50 - 112 mm |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 190 x 190 up to 1300 x 450 mm |
| Max. workpiece height: | 250 - 764 mm |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser engraved trophy label made of TroLase Foil
Learn how you can make an individual trophy sticker with a Speedy flexx and TroLase foil.
Preparation
Required material:
- 1/4 sheet TroLase foil silver brushed (or any other color of your choice)
- Material to cover the engraving table
Machine used:
- Speedy 360 flexx, 80/30 Watt
- 2.85" lens
- Vacuum table and honeycomb cutting table
You can produce this sample with any machine of the Speedy family (no fiber laser required).
Tips:
We engraved this sample with the fiber laser, because the design is extremely intricate. Due to the smaller spot size of the fiber laser, we achieve better results. This works only on metallic TroLase foils (silver matt, silver brushed, gold, copper).
With the CO2 laser you can process all TroLase foil materials.
Step by Step
Step 1: Import design
Make your own design or import our template. Adapt it to the size of your trophy if necessary. Then send the job to the laser using the driver settings below:
| Process mode | Resolution | Cut line | Halftone | Others |
|---|---|---|---|---|
| Standard | 1000 dpi | None | Color | - |
Info: When engraving with the fiber laser, always use 1000 dpi resolution. It works best in combination with the small spot size of the fiber laser.
Step 2: Laser process label
Put the TroLase foil into your laser and focus on the material. Then make the parameter settings. Our settings can vary depending on laser machine and laser power available.
Laser Parameters Engraving:
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Black | Engrave FLP | 20 | 55 | 30,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | on | 0mm | - |
Laser Parameters Scratching:
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Red | Cut CO2 | 8 | 1 | 1000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | 4 mm | - |
Laser Parameters Kiss-cut:
| Color | Process | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Blue | Cut CO2 | 9 | 1 | 1,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | - | - |
Laser Parameters Cutting:
| Color | Process: | Power (%) | Speed (%) | ppi/Hz |
|---|---|---|---|---|
| Green | Cut CO2 | 40 | 2 | 1,000 |
| Passes | Air Assist | Z-Offset | Advanced |
|---|---|---|---|
| 1 | On | - | - |
Info:
The advantage of the fiber laser is the smaller spot size. Therefore less heat is applied on the material. The foil remains flat and does not bend.
Step 3: Cleaning
Clean the label with a damp cloth. This works best inside the engraving cabinet with activated exhaust.
Inspiration
TroLase Foil is available in many colors. Browse our webshop and be inspired for your next application.
TroLase Foil can also be used for exterior use like mailbox labels or door bell name plates.