Paper packaging

Step by step instruction

Find out how you can produce this creative and classy packaging using custom colored paper.


Required material:

  • Uncoated, colored paper 130 g
  • Paper glue or double-sided adhesive discs

Machine used:

  • Speedy 360 80 Watt
  • 2" lens
  • Aluminum grit cutting table

For this sample you can use any  machine from the Speedy laser engraver series.


Step by Step

Step 1: Import /create design template

Import our graphic into your graphic program. Adapt is to your customers' needs and send it to the laser.

Print settings

Process mode Resolution Cut line
Standard 333 dpi non
Halftone Others
Black & White -

Step 2: Laser process

To laser engrave this kind of paper, you need only minimal laser power because the material is bleached. Put the paper into your laser engraver and start the laser process using the parameters below.

Laser Parameter

Color Process Power (%) Speed (%) ppi/Hz:
black Engrave CO2 10 10 500
red Cut CO2 2 2 1000
blue Cut CO2 7 4 1000
cyan Cut CO2 9 9 1000
Passes Air Assist Z-Offset Advanced
1 on - -
1 on + 3 mm -
1 on + 3 mm -
1 on - -

Step 3: Post-processing

Remove the paper from the laser machine. First fold along all folding lines and glue packaging together using paper glue or the double-sided adhesive disks.


Use different kinds of paper for impressive effects. Click here to find more designs for paper packaging.

Trotec Product recommendations

See our lasers in action! Request a demo now
Request a demo now