laser-engraved-door-mat

Laser engraved door mat

Step by step instructions

Customize conventional door mats with your Trotec laser and add extra value to this product quickly and easily.


Preparation

Required material:

  • single-color door mat

Machine used:

  • Speedy 400, 120 watts
  • 4" lens
  • Vacuum table

Depending on the size of the door mat, you can use any other machine of the Speedy laser engraver series.

Tip:

Due to the coarse structure of the door mat, we used a lens with long focal length to compensate the unevenness of the material.


Step by Step

Step 1: Import design

Make your own design or import our template.

Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 333 dpi none
Halftone Others
Color -

Tip:

Since a door mat is typically viewed from the distance, you can use a lower resolution which reduces the production time. 


Step 2: Engraving the door mat

Put the door mat into your Trotec laser. Make the parameter settings. The recommended settings can differ depending on the laser machine used and laser power available.

Laser parameters engraving:

Color Process Power (%) Speed (%) ppi/Hz
black Engrave CO2 80 100 500
Passes Air Assist Z-Offset Advanced
1 ON 4mm -

Tip:

Since a door mat is typically viewed from the distance, a resolution of 333 dpi is sufficient. 


Inspiration

  • Engrave logos of companies, sports clubs or other organizations and extend your customer base.
  • Slogans for private house builders or the first apartment are perfect for individual promotional items.


Trotec Product Recommendations