Import your template and adapt it to your requirements. We cut the transparent material to size of the picture frame in advance and print the design to the back of the ADA with an UV-printer.
Alternatively you can print whole sheets of material with registration marks and cut it afterwards using the JobControl Vision camera system.
Step 2: Design flower
Import our template and adapt it to your requirements. Pay attention to the thickness of the lines, as when they are too thin they can easily brake. Send the job to the laser using the driver settings below.
Print settings:
Process mode
Resolution
Cut line
Standard
500dpi
none
Halftone
Others
Color
Optimized Geometries, Inner Geometries First
Step 3: Laser process
The laser parameters may vary depending on the type of laser machine and available laser power.
Laser Parameters:
Color
Process
Power (%)
Speed (%)
ppi/Hz
Red
Cut CO2
38
0.8
1000
Passes
Air Assist
Z-Offset
Direction
Advanced
1
ON
-
-
-
Step 4: Assembly
Put the printed sheet with the passepartout into the picture frame and stick the silhouette of the flower to the front.
Inspiration
TroLase ADA Signage is a solid, single-layer acrylic-based material used mainly for Braille and tactile sign making, model making and 3-dimensional signs. This abstract floral decoration shows that TroLase ADA Signage is also perfectly suited for filigree artistic applications.
Instead of printing you can easily bring color into you design with different materials. For example cut acrylic, TroLase or wood and put it inside the flower.
Copyright notice: This template may not be used for products for resale or other distribution. If you intend to do so, you must purchase your own iStock license. We assume no liability for illegal actions.
