Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser software for galvo marking lasers
Every material reacts differently reaction to a laser process. During laser engraving and laser cutting, the supply of compressed air can significantly influence and improve the results. Furthermore, Air Assist protects the lens against damage as it prevents dust from adhering to it. The Air Assist is switched on and off automatically by the JobControl Software. If the Trotec laser is delivered from the factory with Air Assist and pump installed, the two units are directly integrated in the enclosure. Many Trotec laser systems are equipped with the Air Assist; all you have to do is connect an external compressor.
Product | Air assist without pump | Air assist with pump |
---|---|---|
Speedy 100 | Option | Option |
Speedy 100 fiber | Standard | Option |
Speedy 100 flexx | Standard | Option |
Speedy 300 | Standard | Option |
Speedy 300 fiber | Standard | Option |
Speedy 300 flexx | Standard | Option |
Speedy 400 | Standard | Option |
Speedy 400 flexx | Standard | Option |
SP500 | ⎯ | Standard |
SP1500 | ⎯ | Standard |
SP3000 | ⎯ | Standard |
Laserati | ⎯ | Standard |