Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
With Trotec's SpeedMarker marking lasers, you can laser mark cylindrical and round objects using the rotary engraving attachment. The rotary engraving attachment allows you to mark rotating objects so that the laser always works in focus. The segmentation (division into individual marking sections) is carried out via the SpeedMark marking software. With the rotary engraving attachment you can laser mark components 360°, both on the circumference and on the inside.
In order to use the rotary engraving attachment, you must first connect it. In the tutorial you will learn how to connect the rotary engraving attachment, both mechanically and in terms of software engineering, to the SpeedMarker marking laser. Once the rotary engraving attachment is connected, it can be completely controlled via the SpeedMark laser software. In the software, you define the desired marking content and set the laser parameters as well as the desired segmentation. In order to engrave the inside of the ring, you must position it at an angle under the laser. This ensures that the laser beam does not hit the outer part of the ring (see picture). It's that easy to refine the ring through laser engraving.