1. Trotec Laser
  2. Learn & Support
  3. Laser projects
  4. Inspection stickers

Inspection stickers out of TroLase Foil

In this tutorial you will learn how to produce TroLase stickers that can be used for quality control or other purposes.

laser cutting sticker trolase foil

Preparation

Required material
  • 1 sheet TroLase Foil green
  • Material to cover the engraving table (e.g. paper)
Machine used
  • Speedy 360, 70 watts
  • 1.5" lens
  • vacuum table with honeycomb cutting table

For this sample you can use any laser machine from the Speedy laser engraver series.

Tip

TroLase Foil metallic can be processed with a fiber laser as well. (For more information, see DIY Trophy Label.)

trotec-inspection-stickers.zip

ZIP

Download now

Step by step

Trotec print settings trolase foil
Step 1

Step 1: Import design

Make your own design or import our template. Adapt it to your requirements. Send the job to the laser using the driver settings below.

Print settings:

Process mode Resolution Cut line
Standard 600 dpi none
Halftone Others
Color Optimized geometries, inner geometries first
laser engraving green trolase foil
Step 2

Step 2: Engraving TroLase Foil

Put TroLase Foil into your Trotec laser and cover the rest of the engraving table to maximize the vacuum effect. Start the engraving from the bottom to prevent the dust from settling on the engraved areas. The parameters can differ depending on the laser machine used and laser power available.

Laser parameters

Process Color Process Power (%) Speed (%)
engraving black Engrave CO2 60 80
scratching red Cut CO2 10 1.5
cutting blue Cut CO2 40 2
ppi/Hz Passes Air Assist Z-Offset Advanced
600 1 on +0.5 mm High Quality
1000 1 on - -
1000 1 on - -

Info:

During kiss-cutting you cut through only the top layer of the sticker material, while the backing layer remains intact. This allows the stickers to be easily peeled and removed from the backing layer.

laser kiss-cut trolase foil
Step 3

Step 3: Cleaning and assembling

Clean the sheet with a damp cloth. Leave the material in the machine and the vacuum activated to make the cleaning process easier.

trotec inspiration trolase foil

Inspiration

  • Use TroLase Foil red to produce counterparts that can be used for unreleased items.
  • You can easily adapt the graphics and individualize the items.
  • For large quantities or mass production, use our Galvo CO2 laser GS1000

Speedy series
 The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo