--------------------------
acrylics-laser-cutting-coffee-bar

Acrylic coffee caddy

Produce this stylish coffee caddy using several layers of TroGlass. This is a project for advanced laser users.

Preparation

Required material
  • 1/2 sheet TroGlass Duo Night and Day 3mm (or other various TroGlass products 3mm)
  • 1/2 sheet TroGlass Clear 10 mm
  • Rest TroGlass Clear 3mm
  • Rest TroGlass frosted Light Yellow
    (Materials available from Trotec
  • Material to cover the working table
  • Adhesive tape
  • Acrylic glue
  • Coffee beans
Machine used
  • Speedy 400 with 120 watts
  • 2" and 2.5" lens

This sample can be produced with any laser machine of the SP laser cutter series. For high-quality and efficient cutting of 10 mm acrylic you need laser power of 100 watts or more.

Tip

Use the acrylic cutting table or the cutting table with acrylic lamellas.
Remove the protective foil on the front right before laser procesing to avoid scratches.

csm_coffee-caddy_362471eca4.png

PDF

Download now

Step by step

acryl-display-coffee-capsule-holder
Step 1

Step 1: Import design

Import our design template into your graphic program. Send the job to your laser using the print settings mentioned in the next step.

acrylics-laser-cutting-coffee-bar
Step 2

Step 2: Kerf correction

When cutting, a kerf develops due to the vaporization of the material and the laser beam diameter.

The difference between the inner edge and the outer edge of the cut is called 'kerf'. The drawing must be adapted to this kerf to ensure durable positioning of the inserted parts.

Simply incorporate the calculated kerf by using the "Contour" command in CorelDraw. With this, the cut is actually as large as required, and the inserted material fits in the base material. (We used a kerf of 0.21 mm.) Expand all green cutting lines to the previously calculated kerf.

Print settings

Process mode Resolution Cut line
Standard 500 dpi non
Halftone Others
Color enhanced geometries, inner geometries first
acrylic-capsule-holder-laser-cutting
Step 3

Step 3: Laser process

Engrave and cut the various parts of acrylic. For optimal suction, positon the material and cover the rest of the engraving table. Furthermore, remove the protective foil from the front of the material.

Use the 2" lens for the 3 mm acrylic, the 10 mm material is cut with the 2.5" lens. Start the engraving from bottom to top for optimum engraving results.

Laser Parameters

Material Color Process Power (%) Speed (%)
TroGlass Duo 3 mm black engrave CO2 12 20
TroGlass Duo, Frosted 3 mm red, green cut CO2 40 0.2
TroGlass Clear 3 mm red, green cut CO2 30 0.2
TroGlass Clear 10 mm red, green cut CO2 90 0.1
ppi/Hz Passes Air Assist Z-Offset Advanced 
500 1 on - Engraving direction from bottom
5 000 1 on - -
20 000 1 on - -
20 000 1 on -3 mm -

Info:

  • We used the JobControl® standard parameters optimized for quality.
  • You can download the material parameters from www.troteclaser.com
acrylic-coffee-capsule-holder
Step 4

Step 4: Assembly

Finally, glue the individual parts together. Mount the letters and the storage compartments into the base plates, and secure the coffee bar on the wall with screws and dowels.

Tip:

In order to achieve a special effect, fill some coffee beans in the hollow space behind the storage compartments.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo