Use our template and instructions to make this creative desk pen holder.
We used engraving materials available at Trotec. (Browse product range: www.trotec-materials.com.)
- 1 sheet solid wood maple 300 x 100 x 5 mm
- Material to cover the engraving table (e.g. paper)
- Pens and business cards
Check the thickness of the material before you start and adapt the kerf if necessary.
Make your own design or use our template. (You can also adjust our template to meet your requirements.)
You can adapt the diameter of the holes depending on the pens you want to insert.
Send the job to the laser using the following print settings:
|Process mode||Resolution||Cut line|
|color||enhanced geometries, inner geometries first|
Adjust the parameter settings in your laser software. The suggested parameters can differ depending on the machine used and the laser power:
|Color||Process||Power (%)||Speed (%)||ppi/Hz|
|Creasing: red||cut CO2||7||1||1000|
|Cutting: red||cut CO2||100||1.6||1000|
We used the standard parameters from JobControl® for 5 mm solid maple.
Remove the wood from the laser and clean it with a damp cloth. To assemble it, simply put together the two parts.
Now this desk accessory is ready to be sold to your customers and filled with pens or business cards.
- Let your creativity flow and make this pen holder out of different materials or use different shapes.
- You can produce the pen holder in advance and add the individual engraving for your customers when needed.