Create a wall decoration using TroGlass and wall distance holders.


Preparation

Used material:

  • 3 pcs. TroGlass in different colors
  • Distance holders R15-15-FL

Machine used:

  • Speedy 400
  • 120 watts
  • 2" lens
  • vacuum table with acrylic cutting grid table

Of course, this pattern can also be copied with all other machines of the Speedy laser engraver series.


Step by Step

Step 1: Import the graphic file

Import our template and adapt it to your requirements. Send each of the jobs to the laser using the driver settings below.

Print Settings

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Color Optimized Geometries, inner geometries first

Steps 2: Laser process

The laser parameters may vary depending on the type of laser machine and available laser power.

Laser parameters:

Color Process Power (%) Speed (%) ppi/Hz
red Cut CO2 100 1,2 5000
Passes Air Assist Z-Offset Direction Advanced
1 ON - - -

 

 


Step 3: Assembly

With the back plate mark the drill holes in your wall. After that place the plate to the wall and fix it with the distance holders to the wall. Now add the colored acrylic letters to the distance holders and secure them with an Allen key. That's how easy it is to make this individual wall decoration with distance holders.


Inspiration

Try different sizes, materials and fonts. There is no limit to your creativity.


Check out the Speedy laser engravers