Decorative chickens for Easter

Combine wood and LaserLeather to create an Easter decoration.

Preparation

Required material:
  • Solid cherry wood, 600 x 300 x 5 mm.m
  • LaserLeather, silver/red, approx. 500 x 80 mm
  • Double-sided adhesive foil, approx. 500 x 80 mm (needed for gluing on the LaserLeather)
Machine used
  • Speedy 360
  • 80 Watt
  • 2" Lens
  • Nozzle with small hole diameter
  • Aluminum grid table or the honeycomb cutting support

Of course, the deco can also be made with another machine of the Speedy laser engraver series. Adjust the parameter settings according to your machine.

Graphic files

ZIP

Download now

Step by step

Step 1

Step 1: Import the design

Create your own design or use our template. Now send the job to the laser with the settings below.

Upload both the pdf template for the wood "chicken_wood" and for the LaserLeather "chicken_laserleather" using the "import file" command in Ruby.

Step 2

Step 2: Laser process solid wood

Now place the wooden panel in the laser unit. Cover the remaining processing area well to obtain an optimal vacuum and thus a uniform laser result.

Select the design template "chicken_wood", mark the entire graphic and then click on "Create job". Now you can select the "solid wood cherry - engraving dark" parameter from the material database. If necessary, you also have the option of adjusting the parameter settings individually. For the "Processing rules", please make sure that the "inner geometries first" function is selected. This means that the inner cuts are executed first. Place the graphic on the workspace and send the print job to the "queue".

Our suggested parameters may differ depending on the laser machine used and the available laser power.

Close the machine, make all necessary settings and start the laser process.

Laser parameters:

  Engrave Cut
Color Black Red
Process Engrave CO2 Cut CO2
Power (%) 60 95
Speed (%) 50 1
ppi/Hz Auto PPI 1000
Passes 1 1
Air Assist ON ON
Z-Offset 6 mm -
Direction Top to bottom -
Advanced Optimized quality -
Engraving mode Standard -
Raster Ordered -
Step 3

Step 3: Laser process LaserLeather

Apply the double-sided adhesive foil to the back (= red side) of the LaserLeather. In this way, the individual elements can then be easily and accurately glued to the wooden figures.

Now place the LaserLeather in the laser unit with the silver side facing up. Cover the rest of the processing area well in order to achieve optimal suction performance and an even laser result.

Now select the "chicken_laserleather" design template and the corresponding parameters for the "LaserLeather" from the material database. Of course, you can also make the parameter settings individually.

Again, our suggested parameters may differ depending on the laser machine used and the available laser power.

Close the machine, make all necessary settings and start the laser process.

Laser parameters:

  Engrave Cut
Color Black Red
Process Engrave CO2 Cut CO2
Power (%) 52  25
Speed (%) 100 1,7 
ppi/Hz Auto PPI 1.000 
Passes 1
Air Assist ON ON 
Z-Offset 1 mm
Direction Bottom to top
Advanced optimized quality
Engraving mode Standard
Raster ordered
Step 4

Step 4: Assembly

If necessary, carefully clean the cut parts with a soft, slightly moistened cloth.

Peel off the protective film from the back of the LaserLeather elements and glue the individual parts onto the different wooden chickens one after the other. The figures are glued on the front and back side respectively.

Now insert the chickens and the grasses into the slots provided. The arrangement is freely designable. In the set with the smaller chickens, you can optionally use the lettering "Happy Easter" instead of a chicken.

Inspiration

Both the solid wood and the LaserLeather are available in different finishes. Test different colors and choose a combination to your taste!

Browse material range

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo