individual engraving on drink glass

Laser engraved
Softdrink Glass

Step by step guide

Add value to inexpensive drinking glasses with decorations, names or designs. We have used the rotary attachment to add style to a 10 ¼ oz drinking glass (31 cl).


Required material
  • 10 ¼ oz glass (31 cl)
  • Paper towel
  • Water
  • Sponge
Trotec laser used
  • Speedy 300
  • 30 watts
  • 2 inch lens


Download now
Soft Drink Glass


Download now

Step by step

individual engraving on drink glass
Step 1

Step 1: Preparation

First, take a slightly moist paper towel. Preferably use a sponge or a spray bottle for moistening. Place the paper towel on the surface that you wish to engrave later. This will prevent splintering of the glass during the engraving process.

protect glass during engraving
Step 2

Step 2: Rotary Attachtment

Place the rotary engraving attachment into the laser and insert it. Next, switch the laser on. You can now clamp the glass into the rotary attachment and focus on the surface. If you use a conical glass, tilt the rotary attachment until the engraving surface is positioned parallel to the work table.

Step 3

Step 3: Used Laser Settings

Open the file "BBQ Glass" and send it to the laser. Make sure that the rotary attachment is enabled in the driver and that you have entered the correct diameter of the glass. You can now start the engraving process.


Engraving: Power: 100 %, Speed: 20 %, Resolution: 500 dpi 

drink glass laser engraving
Step 4

Step 4: Cleaning

As soon as the engraving is complete, remove the paper from the glass.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo