Speedy series: CO2 laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step guide
This tutorial shows you how to laser engrave and cut a muffin or cupcake case created from TroLase Thins.
Follow our simple tutorial, which also has the option to change the size of the graphic or use different material colours. The finished product can be also used for cupcakes or as a festive decoration around a candle in a glass.
TroLase Thins Port Wine / Gold (0.5mm thick)
Create the graphic in a graphics program or import our template. The parcels are defined as engraving areas by the black fill, snow crystals and border lines must be defined as cutting lines (width: hairline; R: 255; G: 0 B: 0). Additionally, you can add text at the bottom of the graphic for a personal touch.
To bend the strip later to a muffin case, bend the graphics in Adobe Illustrator with the warping tool or in Corel Draw with the tool 'Envelope' (menu: Effects > Envelope > Simple arc > putty). Hold Ctrl and then drag the lines to the desired arc.
Cutting: power: 300% - speed: 1.5% - frequency: 1000 Hz- air assist: ON
Engraving: power: 70% - speed: 80% - frequency: 500 ppi - air assist: ON - Z-Offset: 1mm - high quality: ON
In the menu plate setup, choose start position bottom. Remove protection foil from the laminate and check the vacuum. Focus the laser and off you go!