Speedy series: CO2 laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Digital production of models, prototypes, research and DIY projects
In FabLabs, Maker Spaces, universities or schools, Trotec laser machines are used for model making, industrial design, prototype construction, in research, and in many other DIY projects. The amazing and inspiring designs that laser technology offers are also ideal for product development in start-ups and small businesses.
In digital production many different materials are used -- from cardboard, paper, MDF, wood to acrylic. Textiles, plastics, polystyrene or film can also be processed with great results. In addition, it is not necessary to consider the diameter of the tool. Depending on the lens used, the laser beam is about 0.1 mm wide. Therefore almost any geometry can be cut using the laser.
Due to their flexibility and ease-of-use, lasers are a great tool for test setups and prototypes. Drawings and designs can be sent directly from the CAD or graphics program to the laser.
Do almost anything with the laser
The laser cutter is THE tool in digital production. In addition to the variety of materials that are processed in FabLabs, universities or schools, even the finest geometries can be produced with the highest precision. Laser cutting gives users complete freedom for developing and implementing ideas. Using engravings and cuts, inspiring designs can be produced with a Trotec laser in just a few process steps.
Quite the opposite. The JobControl® laser software supports you with JobHistory and JobTime Calculator during advance planning and the possible necessary billing afterwards. In addition, a lock mode for laser parameters can be adjusted so that predefined parameters from the material database can not be changed retrospectively. Thus, all users find the same initial situation at any time.