Laser Engraved Wedding Glass

This tutorial shows you how to personalise and customise simple glasses with engraving technology. Ideal for weddings, engagement parties and other special events, these glasses will make the perfect gift idea for your loved ones.

unique glasses engraved with a trotec laser

Preparation

Required material
  • Rotary attachment
  • Champagne glass
  • Paper towel
  • Sponge or a spray and some water
Trotec laser used
  • Speedy 300,
  • 80 watts,
  • 2.0 inch lens
Tip

Use a 2 inch lens instead of a 1.5 inch lens to prevent the glass from cracking

Wedding Glass

ZIP

Download now
csm_wedding-glass_8ef591edeb.png

PDF

Download now

Step by step

unique glasses engraved with a trotec laser
Step 1

Step 1: Mount the rotary attachment

Before you start working, ensure the laser machine is switched off. Once this is done, you can then mount the rotary attachment and plug it in. After that, switch on the laser and place the prepared glass into the rotary attachment. 

rotary attachment with the prepared glass
Step 2

Step 2: Prepare the glass

In order to prepare the glass, you will need a paper towel, some water and a spray or sponge. Apply a paper towel on the surface of the glass and moisten it with a sponge or spray. This will prevent splintering of the glass. To help achieve a perfect result, ensure that there are no air inclusions or wrinkles.

laser software rotary engraving glass
Step 3

Step 3: Put the glass into the rotary attachment

Insert your prepared glass into the rotary attachment and make sure that it is firmly attached. If your glass is conical, adjust the inclination angle so that the surface you wish to engrave is in a parallel position.

customized glasses for your wedding or any other event
Step 4

Step 4: Engrave your glass

Import the PDF file into Corel Draw. Feel free to customise the existing design as you wish or create your own unique design and send it to the laser. Ensure that you have activated the rotary attachment and entered the diameter of the glass in the properties dialogue (see screenshot in step 3). 

Used engraving parameters:

Power: 100%
Speed: 60%
Frequency: 500 ppi
Air Assist: OFF

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Request more
information now.

Proud member of troGROUP Logo