- 3mm acrylics
- eyelets and hooks
- Acrylic can be purchased through the Trotec webshop
Trotec laser used
- Speedy 300
- 60 watts
- 2.0 inch lens
- Dark coloured or radiant acrylics look very elegant
- Use a 2.0 inch lens for a perfect cut
Step 1: Cut the jewelry
Create your own design or use our template (to download click here). Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine being used and the available laser power.
Recommended cutting parameters:
power 100%, speed 1.0%, frequency 5000 Hz, Air Assist on
Step 2: Cut and engrave the jewelry stand
You can also either create your own or use our template for the design of the jewellery stand (for download click here). Be careful, the stand has to be high enough to carry a necklace and has to have a stable pillar.
Recommended engraving parameters: power 20%, speed 50%, 500 ppi, Air Assist on
Recommended cutting parameters: power 100%, speed 0,5%, frequency 1000 Hz, Air Assist on
Step 3: Assembly of the jewelry
Use eylets and hooks to attach the pieces on a necklace. There are special hooks for the earrings. You find such material in handicraft shops, on online platforms like Amazon or in special beading shops.