How to use the rotary engraving attachment with the SpeedMarker lasers

What benefits does the rotary attachment offer?

Using the Trotec SpeedMarker you can use the rotary engraving attachment to laser mark cylindrical and round objects. The rotary engraving attachment allows you to mark round objects by rotating them, ensuring that the laser always remains in focus. The segmentation (division into individual marking sections) is carried out via the SpeedMark marking software. The rotary attachment enables 360° laser marking, both on the circumference and on the inside.

SpeedMark marking software

How to engrave the inside of a ring

Step one is to connect the rotary engraving attachment. Follow the tutorial steps in order to attach the laser physically to the machine, then to connect it to the software Once the rotary engraving attachment is connected, control the attachment from within the SpeedMark software. In the software, you select the artwork to be laser marked, set the laser parameters, and the desired segmentation. In order to engrave the inside of a ring, you must position it at an angle under the laser. This ensures that the laser beam does not hit the outer part of the ring (see picture). It's that easy to customise a ring using a Trotec Laser engraver and a rotary attachment.

Get personal support from our laser experts.

Technical support
Proud member of troGROUP Logo