Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
⚫ Graver | ⚫ Skær | ⚫ Mærk |
Lasertype: | CO₂, Flexx eller Fiber laser |
---|---|
Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
Arbejdsemnets maks. højde: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2-laserskærer til materialer i stort format.
⚫ Graver | ⚫ Skær | ⎯ Mærk |
Lasertype: | CO₂ laser |
---|---|
Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
Arbejdsemnets maks. højde: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
⚫ Graver | ⎯ Skær | ⚫ Mærk |
Lasertype: | CO₂ eller Fiber laser |
---|---|
Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
Arbejdsemnets maks. højde: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Use acrylic to make this extraordinary Christmas tree. (To browse full materials range, please visit www.trotec-materials.com)
You can also use machines from the SP series. If you are using other machines from the Speedy series, please adjust the cutting file according to the table size.
Use the acrylic grid cutting table for perfect cutting results on acrylic.
Import our design template into your graphic program or make your own design. Then send your design to the laser.
process mode | resolution | cut line |
---|---|---|
Standard | 500 dpi | none |
halftone | others |
---|---|
color | enhanced geometries inner geometries first |
Laser cutting TroGlass acrylic creates elegant, polished edges. Position the acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Remove the protective foil after the laser process.
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
red | cutting CO2 | 30 | 0.2 | 5000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 0 | - |
To assemble the Christmas tree, thread the bands through the single rings starting with the smallest one.
Fasten the rings with knots or use super glue to hold them in position. In our sample we used a distance of 25 - 30 cm between the rings.
Now let your creativity flow and decorate the acrylic tree with any items you like.
Do not use candles with real flames for this acrylic tree. Use electrical candles or light chains to illuminate the tree.