Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
⚫ Graver | ⚫ Skær | ⚫ Mærk |
Lasertype: | CO₂, Flexx eller Fiber laser |
---|---|
Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
Arbejdsemnets maks. højde: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2-laserskærer til materialer i stort format.
⚫ Graver | ⚫ Skær | ⎯ Mærk |
Lasertype: | CO₂ laser |
---|---|
Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
Arbejdsemnets maks. højde: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
⚫ Graver | ⎯ Skær | ⚫ Mærk |
Lasertype: | CO₂ eller Fiber laser |
---|---|
Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
Arbejdsemnets maks. højde: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Open the JobControl laser software and click the "Start/Pause" button to stop a running job.
Press the "Start/Pause" button directly on the laser machine's control panel to stop the current job.
Pausing the current laser job offers many advantages. You can open the cover and manually move the laser head or axes. You can e.g. check the quality of the engraving or the cut. If you are pleased with the result and want to continue the job, click or press the "Start/Pause" button again. The laser then moves to the original position, where it was stopped, and continues the job.
Go to the JobControl software and click on the "Stop" button in the lower right area of the screen.
If you open the cover of the laser during processing, the safety circuit is interrupted and the job is canceled.
If you stop a job by clicking or pressing the "Stop" button, the job must be restarted from the beginning. It is not possible to continue the job at the point that it was stopped.
Do you have further questions about the control and operation of your laser machine? Then please contact our technical support. We would be happy to help you.