--------------------------

Laser Safety

Safe Production Environments with Trotec Laser Machines

Laser machines are all divided into internationally valid 'classes' based on their performance, as well as the risk of injury to the eyes and skin if contact is made with the laser beam; Safety Class 1 offers the highest safety, while Safety Class 4 has the potential to emit radiation. The use of protective gear (goggles, gloves) is necessary here.
laser-safety-class-2

How Safe are Trotec Laser Machines?

Trotec laser machines have a functional, sealed-off design, ensuring the user is always optimally protected. This concept allows for rapid and efficient extraction of dusts and gases. The closed Trotec flatbed laser machines belong to laser Safety Class 2 - laser pointers are built into the Trotec devices, and this shows the user where the laser beam will hit the material. According to the internationally valid standard, laser pointers with an output of less than one milliwatt must belong to laser Safety Class 2. 
ProMarker-100-laser-safety-glasses

Laser Safety Class 4 Machines

If the Trotec laser engraving machine is equipped with a hatch, the chassis will have an opening where radiation can, technically, exit. These laser devices fall into the laser Safety Class 4 range. A similar situation occurs with Trotec Galvo laser machines. The laser must be classified as Safety Class 4 if it doesn't have corresponding housing. These machines can only be operated with special protective equipment (protective glass, shields, protection goggles).
ProMarker-100-laser-safety-glasses
You are always free to contact us regarding the topic of laser safety - we want to keep you and your laser equipment safe! Contact Us

Classification of the Laser Safety Classes:

Safety Class 1:

The laser radiation of this class is completely harmless - even with prolonged exposure. Or, the laser itself is housed in a radiation-impervious manner.

Safety Class 2:

This class comprises visible lasers (laser pointers with an output below 1mW), which are only safe for your eyes with short-term radiation below .25 seconds.

Safety Class 3:

The accessible laser radiation is, in any case, dangerous to the eye. You also need to be particularly careful of reflections. Trotec does not offer any machine from this class. 

Safety Class 4:

Damage to the skin and eyes can be caused, and fires can be triggered within the 'danger' zone of the machine. Here, the user is obliged to fully comply with all protection provisions.

Which Safety Class do the Individual Trotec Laser Machines Have?

Speedy laser engravers

Product overview Laser performance (in Watt) Laser type Safety class Protective measures necessary
Speedy 100 30, 45, 60 W CO2 2 no
Speedy 100 flexx 30, 45, 60 W CO2
20, 30 W fiber
CO2 and fiber 2 no
Speedy 300 30, 45, 60, 80, 100, 120 W CO2 2 no
Speedy 300 flexx 30, 45, 60, 80, 100, 120 W CO2
20, 30, 50 W fiber
CO2 and fiber 2 no
Speedy 360 60, 80, 100, 120 W CO2 2 no
Speedy 360 flexx 60, 80, 100, 120 W CO2
20, 30, 50 W fiber
CO2 and fiber 2 no
Speedy 400 * 60, 80, 100, 120 W CO2 2 no
Speedy 400 flexx* 60, 80, 100, 120 W CO2
20, 30, 50 W fiber
CO2 and fiber 2 no
         
*if the laser is equipped with an optional hatch     4 yes
More about Speedy laser engravers

SP laser cutters

Product overview Laser performance (in Watt) Laser type Safety class Protective measures necessary
SP500 * 40-200 W CO2 2 no
SP1500 100-400 W CO2 2 no
SP2000 60-400 W CO2 2 no
SP3000 60-400 W CO2 2 no
         
*if the laser is equipped with an optional hatch     4 yes

More about SP laser cutters

SpeedMarker marking lasers

Product overview Laser performance (in Watt) Laser type Safety class Protective measures necessary
SpeedMarker 50 20, 30, 50 W fiber 4 yes
SpeedMarker 300* 20, 30, 50 W fiber 2 no
SpeedMarker 700 30, 45 W CO2
20, 30, 50 W fiber
CO2 and fiber 2 no
SpeedMarker 1300 20, 30, 50 W fiber 2 no
SpeedMarker 1350 20, 30, 50 W fiber 2 no
SpeedMarker 1600 20, 30, 50 W fiber 2 no
         
         
*if the laser is equipped with an optional hatch     4 yes
More about marking lasers

Laserati

Product Overview Laser Performance (in Watt) Laser Type Safety Class Protective Measures Necessary
Laserati

100 or 200 W

CO2 2 no

What Safety Equipment Does a Trotec Laser Have?

interlock-safety-switch-Speedy400
All Trotec laser machines are CE-compliant, thus meeting the essential safety and health requirements of the EC Machinery Directive 2006/42/EC. Here, you will find an overview of all machine-specific safety and protection equipment, which makes our laser machines some of the safest in their class internationally. 
interlock-safety-switch-Speedy400

Interlock Safety Switch

Cladding elements, side covers/front hood and the protective cover all serve as optimal protection for the laser machine itself. These covers are all fitted with interlock safety switches. If the protective cover or any other interlock-secured cover is opened, a signal will sound, and the laser machine will immediately pause. This ensures maximum safety for the user always. 
laser-safety-moving-light-curtain-SP3000

All-Round Light Curtain System for SP Laser Cutters

A 'moving light' curtain system is situated around the safety bumpers on the x-axis, and it will define an all-round protection zone on the working area. If the user enters this protection zone at ant time, the laser will stop immediately. More about the Trotec safety system

Protective Cover

For all closed laser systems, including the Speedy Laser Engraver series or SP Laser Cutter series, the acrylic cover provides extensive protection from the laser light. Depending on the laser source, different protective covers should be used. For example, laser machines with a CO2 laser source have a blue acrylic cover, and fiber lasers have a green cover. Due to this colour-coding, the laser light will be completely absorbed, providing optimal protection to the laser user.

Temperature Sensors with a Warning Signal

Certain materials (acrylic) tend to flame up, especially when laser cutting. The specially designed temperature sensors alert the laser user when the temperature in the working area exceeds a critical value. The operator can then respond immediately to the acoustic warning and interrupt the laser process. Nevertheless, laser machines should never be left operating unattended. More About the Temperature Sensor
laser-safety-laser-switch-speedy-400

Safety Switch for Immediate Halt of the Power Supply

If a dangerous situation arises, the power supply can be immediately interrupted by flicking a switch. There are multiple buttons that can do this:
  • Main Switch: Main power supply is disconnected
  • Key Switch: Motor, laser source and electronics are de-energised
  • Emergency Stop Button: Electric circuit is interrupted, the laser beam and all movements are stopped
laser-safety-training-trotec-academy

Laser Safety Training

When installing your Trotec laser machine, you will receive all the important instructions regarding laser safety. Our Trotec Academy also offers comprehensive training in this field.

Or, are you interested in a half-day laser safety training course?

Contact Us

Because individual requirements require individual advice.
We’ll advise you free of charge.

Contact us
Proud member of troGROUP Logo