--------------------------
Multi-layer sign "open"

Multi-layered sign

Create your own unique multi-layered sign using TroGlass material using this "how to" guide.

Multi-layer sign "open"

Multi-layered sign

Create your own unique multi-layered sign using TroGlass material using this "how to" guide.

Preparation

Used material
  • 1/4 TroLase ADA Bright White, 1/32"
  • 1/4 TroLase ADA Black with adhesive, 1/16"
  • 1/4 TroGlass Frosted, Ice Blue
  • 1/4 TroGlass Color Gloss, Ice Blue
  • 1/4 TroGlass Satins, Translucent Lemon Green with adhesive
  • 1/4 TroGlass Satins, Translucent Bright Orange with adhesive
  • Double-sided adhesive tape
Machine used

Any Speedy laser machine can be used to make these signs.

Tip

Experiment with different colours and textures, or using logos from your customers.

trotec-materials-multi-layer-sign.zip

ZIP

Download now

Step by step

Laser cutting TroLase white
Step 1

Step 1: Base plate

Load our template into your graphics program and change it to fit your needs. Send the job for the base plate (bright white) to the laser with the following parameters:

Process mode Resolution Cut line
Standard 500dpi None
Halftone Others
Color Optimized Geometries, inner geometries first
Laser cut white TroLase ADA
Step 2

Step 2: Laser process base plate

These settings could be different depending on the kind of laser machine and its laser power.

Color Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 24 0.8 1,000
Passes Air Assist Z-Offset Direction Advanced
1 On - - -
Laser cutting TroLase black
Step 3

Step 3: Stripes pattern

Send the job for the stripe pattern and letters to your laser machine with the following parameters:

Process mode Resolution Cut line
Standard 500dpi None

 

Halftone Others
Color Optimized Geometries, inner geometries first
Laser cut black TroLase ADA
Step 4

Step 4: Laser process stripes pattern

These settings can change depending on the laser machine you own and its laser power.

Color Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 38 0.8 1,000
Passes Air Assist Z-Offset Direction Advanced
1 On - - -
Usage of adhesive tape for laser cutting
Step 5

Step 5: Colored layers

Send the job for the coloured layers (using TroGlass Frosted and Colour Gloss) with the below parameters.

Before you start cutting the TroGlass sheets, apply the adhesive to the back. Make sure to leave a clearance of 1 1/2" at the top of the sheet—this space will be used for the levitating portion and the triangles.

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Color Optimized Geometries, inner geometries first
Laser cutting of TroGlass with adhesive tape
Step 6

Step 6: Laser process colored layers

Tip: Take off the protective top foil from the TroGlass Frosted and Satins sheets before beginning.

The following settings may be different depending on your type of laser machine and its power.

To precisely place the image, follow the green positioning line.

Laser Parameters Color Process Power (%) Speed (%) ppi/Hz
Engraving Black Engraving CO2 16 20 500
Cutting Red Cut CO2 50 0.2 5,000
Creasing Blue Cut CO2 5 1 1,000
Positioning Green Positioning - - -
Laser Parameters Passes Air Assist Z-Offset Direction Advanced
Engraving 1 ON - Bottom Up High Quality
Cutting 1 ON - - -
Creasing 1 ON - - -
Positioning - - - - -
Assembly multi layer sign
Step 7

Step 7: Assembly

Begin with adhering the striped pattern to the white base plate. When placing it yourself, find the hole to align it.

Next, be sure that the TroGlass Frosted sheet is precisely glued onto the black ADA.

Afterwards, we attach the TroGlass Colour Gloss pieces. The best way to place them is by putting the letters at the bottom so that the area with no adhesive foil is where it should be. Then the black and green or orange letters can be added.

Repeat these same steps on the back side of the shield. Next, put the triangles in the holes.

Thread a string through the holes and your multi-layered sign is complete.

Why Trotec materials?

No matter if you make personal or standardized signs, Trotec's acrylic sheets are the perfect material solution thanks to their range of styles and high-quality finish. The TroGlass series can be recognized by its extremely robust and scratch-resistant surface. Find out more about our wide variety of colours with different surface types and degrees of transparency.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo