Upplev våra lasrar "in action"!
Lasergraverare och laserskärare
Speedy-serien: CO? lasergraverare och -skärare för format upp till 1016 x 610 mm.
| ⚫ Gravera | ⚫ Skär | ⚫ Markera |
| Lasertyp: | CO₂, Flexx eller Fiber laser |
|---|---|
| Arbetsyta: | 610 x 305 upp till 1016 x 610 mm |
| Arbetsstycke maximal höjd: | 125 - 305 mm |
| Lasereffekt: | 20 - 120 watt |
Laserskärmaskin för stora format
SP-serien: CO2 laserskärare för material i storformat.
| ⚫ Gravera | ⚫ Skär | ⎯ Markera |
| Lasertyp: | CO₂ laser |
|---|---|
| Arbetsyta: | 1245 x 710 upp till 2210 x 3210 mm |
| Arbetsstycke maximal höjd: | 50 - 112 mm |
| Lasereffekt: | 40 - 400 watt |
Industriell märkningslaser
SpeedMarker-serien: Industriell höghastighetslasermärkning av metaller och plast.
| ⚫ Gravera | ⎯ Skär | ⚫ Markera |
| Lasertyp: | CO₂ eller Fiber laser |
|---|---|
| Max. arbetsyta: | 190 x 190 upp till 1300 x 450 mm |
| Arbetsstycke maximal höjd: | 250 - 764 mm |
| Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Multifunctional Table Concept for Laser Cutters
Slat Cutting Table
The cutting table with aluminum slats is mainly used for cutting thicker materials (up to 25 mm thickness) and for parts wider than 100 mm. Acrylics can be cut with no reflections by exchanging the aluminum with acrylic slats. One can reduce the number of supporting points by removing slats individually, depending on the job.
Aluminum Cutting Grid Table
This robust, universal cutting table is characterized by extremely stable combs and a long lifetime. It is particularly suitable for cutting tasks with parts smaller than 100 mm, as these remain in a flat position after the cut. Compared to the slat cutting table the aluminum cutting grid table has more supporting points.
Acrylic Cutting Grid Table
The universal cutting table is ideal for the reflection-free cutting of thin acrylics with a thickness up to 8 mm. Like with the aluminum cutting grid table parts smaller than 100 mm remain in a flat position after the cut.