Speedy-serien: CO? lasergraverare och -skärare för format upp till 1016 x 610 mm.
⚫ Gravera | ⚫ Skär | ⚫ Markera |
Lasertyp: | CO₂, Flexx eller Fiber laser |
---|---|
Arbetsyta: | 610 x 305 upp till 1016 x 610 mm |
Arbetsstycke maximal höjd: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2 laserskärare för material i storformat.
⚫ Gravera | ⚫ Skär | ⎯ Markera |
Lasertyp: | CO₂ laser |
---|---|
Arbetsyta: | 1245 x 710 upp till 3250 x 3210 mm |
Arbetsstycke maximal höjd: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriell höghastighetslasermärkning av metaller och plast.
⚫ Gravera | ⎯ Skär | ⚫ Markera |
Lasertyp: | CO₂ eller Fiber laser |
---|---|
Max. arbetsyta: | 190 x 190 upp till 1300 x 450 mm |
Arbetsstycke maximal höjd: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
When a standard laser workstation cannot meet the needs of your laser marking requirements, our experts at Trotec Laser Automation are the correct point of contact. They guide you in three steps from the evaluation phase up to the installation and implementation of the special laser machine.
Here you can find an overview of realised projects.
First we take a look at the customers` requirements, needs and expectations. Then we analyze following:
Based on the requirements, we provide a performance and specification sheet and a draft of the laser machine. Our experts additionally offer an alternative design in order to find the best possible solution.
From the first day on, we emphasize tight cooperation with the customer. After a detailed kick-off meeting, we have regular meetings to be sure that the project meets the customers` requirements. At the end of the project, the machine will be installed together with the customer.
You need a special laser machine for your laser marking, laser engraving or laser cutting process?
Our experts of Trotec Laser Automation are pleased to inform you about your possibilities.