Upplev våra lasrar "in action"!
Lasergraverare och laserskärare
Speedy-serien: CO? lasergraverare och -skärare för format upp till 1016 x 610 mm.
| ⚫ Gravera | ⚫ Skär | ⚫ Markera |
| Lasertyp: | CO₂, Flexx eller Fiber laser |
|---|---|
| Arbetsyta: | 610 x 305 upp till 1016 x 610 mm |
| Arbetsstycke maximal höjd: | 125 - 305 mm |
| Lasereffekt: | 20 - 120 watt |
Laserskärmaskin för stora format
SP-serien: CO2 laserskärare för material i storformat.
| ⚫ Gravera | ⚫ Skär | ⎯ Markera |
| Lasertyp: | CO₂ laser |
|---|---|
| Arbetsyta: | 1245 x 710 upp till 2210 x 3210 mm |
| Arbetsstycke maximal höjd: | 50 - 112 mm |
| Lasereffekt: | 40 - 400 watt |
Industriell märkningslaser
SpeedMarker-serien: Industriell höghastighetslasermärkning av metaller och plast.
| ⚫ Gravera | ⎯ Skär | ⚫ Markera |
| Lasertyp: | CO₂ eller Fiber laser |
|---|---|
| Max. arbetsyta: | 190 x 190 upp till 1300 x 450 mm |
| Arbetsstycke maximal höjd: | 250 - 764 mm |
| Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Inner Geometries first
Unsorted cutting lines can be a waste of time
When cutting and engraving graphics, the laser first carries out all engravings and then all cuts. Cutting is carried out in the order in which the outlines are drawn. However, this may lead to the external contour being cut first and the workpiece tilting, slipping or even falling through the cutting table. Cutting of the internal contours is then no longer possible.
How to order the parts of your laser job
Conventional methods for ordering cutting lines:
- Draw cutting lines in the exact order in which they are to be cut
- Sort cutting lines manually in the graphic before the data is sent to the laser
- Assign the cutting lines different colors in the Trotec material templates, which are then cut in the exact order as listed in the templates.
- The easiest and most convenient way to sort your cutting lines is the "Inner geometries first" feature in the JobControl® Software. It can be activated with only a mouseclick and will automatically sort your cutting lines.
Inner geometries first - featured in JobControl®
Activating this feature simplifies the working process many times over, because the cutting lines are automatically sorted and the internal cutting lines are cut first. This preset automatically improves the quality of your application, because internal parts remain firmly attached to the actual cut and thus cannot slip. The external contour is automatically cut at the end. In addition, this feature also saves time because the lines do not need to be manually sorted in the graphic.