The next step is the most important part: The webs. For this, draw a rectangle from the supporting foot of your element up to the center line. This height from the supporting foot to the center line is very important because it defines how far the graphic elements are pushed forward from the card. You can select the width of the rectangle freely. In the case of the fir tree, the width should be small, since the web is placed at the top of the tree; however it should be at least 2.5mm, so that the web does not bend inadvertently later on. Because our design includes three trees with different distances, we need to create a separate web with the associated height for each tree. The webs are shown in the screen shot with a red filling so you can easily spot them.