Speedy-serien: CO? lasergraverare och -skärare för format upp till 1016 x 610 mm.
⚫ Gravera | ⚫ Skär | ⚫ Markera |
Lasertyp: | CO₂, Flexx eller Fiber laser |
---|---|
Arbetsyta: | 610 x 305 upp till 1016 x 610 mm |
Arbetsstycke maximal höjd: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2 laserskärare för material i storformat.
⚫ Gravera | ⚫ Skär | ⎯ Markera |
Lasertyp: | CO₂ laser |
---|---|
Arbetsyta: | 1245 x 710 upp till 3250 x 3210 mm |
Arbetsstycke maximal höjd: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriell höghastighetslasermärkning av metaller och plast.
⚫ Gravera | ⎯ Skär | ⚫ Markera |
Lasertyp: | CO₂ eller Fiber laser |
---|---|
Max. arbetsyta: | 190 x 190 upp till 1300 x 450 mm |
Arbetsstycke maximal höjd: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
There are three main things you can do to maximize the life of your Atmos exhaust system and optimize suction.
There are only three things that you need to pay attention to in order to take optimal care of your exhaust system:
You should check the filter mat once a month and replace it if necessary. The filter mat is located at the bottom of the device in both the Atmos Mono and the Atmos Duo. In the Atmos Compact, you will find the filter mat on the right side of the device.
IMPORTANT: Before opening the exhaust system, make sure you turn it off and disconnect it from the laser!
The display of your Atmos exhaust system shows the value “Filter," indicating filter saturation (how “full” the filter is). When the value is 100%, the filter must be replaced.
Don't worry, at 10% filter saturation you have the same suction as at 90%. The system automatically regulates this. Nevertheless, the filter must be replaced once it is “full."
A prefilter mat can greatly extend the service life of the Atmos Comfort Box. Once the mat is inserted into the upper frame, it filters out coarse dust and dirt particles and only the fine dust enters the Atmos Comfort Box.
Be sure to also check the prefilter mat regularly and replace it whenever necessary.
Need more help?
Contact the Trotec service hotline where qualified laser experts will assist you with any questions or problems.