Speedy-serien: CO? lasergraverare och -skärare för format upp till 1016 x 610 mm.
⚫ Gravera | ⚫ Skär | ⚫ Markera |
Lasertyp: | CO₂, Flexx eller Fiber laser |
---|---|
Arbetsyta: | 610 x 305 upp till 1016 x 610 mm |
Arbetsstycke maximal höjd: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2 laserskärare för material i storformat.
⚫ Gravera | ⚫ Skär | ⎯ Markera |
Lasertyp: | CO₂ laser |
---|---|
Arbetsyta: | 1245 x 710 upp till 3250 x 3210 mm |
Arbetsstycke maximal höjd: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriell höghastighetslasermärkning av metaller och plast.
⚫ Gravera | ⎯ Skär | ⚫ Markera |
Lasertyp: | CO₂ eller Fiber laser |
---|---|
Max. arbetsyta: | 190 x 190 upp till 1300 x 450 mm |
Arbetsstycke maximal höjd: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Have you received the following error notification: "connection to engraver is broken” in the JobControl® software? If so, the problem is probably the Windows settings for your USB connection. You can fix this problem by updating your settings in Windows. Below are three steps for establishing a functioning USB connection:
1. Go to the “control panel” menu and select the option “All system control elements” or "System and Security."
3. In the tab "Device manager" select the USB interface you wish to use. Then go to “Energy management" and right-click on “Adjustments,” and deselect “Computer can switch off the device to save energy.”
Now re-connect the laser to your PC via the button in the JobContol® software. The problem should now be solved.
Still having problems with your USB connection? Please contact our technical service. We will find a quick solution.