Precious paper
Business cards

Step by step guide

paper business cards laser engraved


Required material

Paper or cardboard, we used "Gmund Doubleface 925 brown, silver"

Trotec laser used
  • Speedy 300
  • 30 watts
  • 1.5 inch lens


Ladda ner nu
paper business card


Ladda ner nu

Steg för steg

business card box laser cut
Steg 1

Step 1:

Open the file "Bussines_Card" in your graphic programme, then send it to the laser. Please keep in mind that the settings for speed and laser power may vary depending on the machine used.

Laser Settings

Black (engraving):
power: 30 %, speed: 25 %, frequency: 500 dpi, air assist: on 

Red (cutting):
power: 30 %, speed: 5 %, frequency: 1000 Hz, air assist: on, Z-Offset: -2

Blue (cutting):
power: 25 %, speed: 1.5 %, frequency: 1000 Hz, air assist: on

Desert blue (cutting):
power: 40 %, speed: 2 %, fequency: 1000 Hz, air assist: on

Steg 2


  • Use the 1.5 inch lens. As a result, the detailed writings become particularly beautiful.
  • If you use conventional paper and not a special cardboard, our suggestion is to reduce the laser power.
  • The combination of the vacuum table and the honeycomb table leads to the best result.
  • Feel free to adapt the design! Be creative!

Den optimala lasergraveraren och -skäraren för personalisering.

Upptäck våra lasergraverare och laserskärare

Har du frågor om applikationer eller inställningar?
Vi hjälper gärna till med allt från Air Assist till Z-offset.

Kontakta oss
Stolt medlem av troGROUP Logo