Advent wreath made of acrylic and MDF

Förberedelse

Required material

3 half sheets (606 x 606 mm) of TroGlass or acrylic of any color and thickness
1 sheet (1220 x 600 mm) of MDF of any thickness
Acrylic and superglue
Candles and decoration

Machine used

Speedy 400 flexx
80 Watt with 2" lens

Important

To cut the MDF, please use the aluminum cutting grid table
For cutting the acrylic, we recommend using the acyclic grid cutting table to prevent reflections of the laser beam on the back of the material

You can use any machine from our SP series for this sample. If you want to use a Speedy 360 or Speedy 300, please adapt the cutting files accordingly. The sheets should have a height of minimum 345 mm.

Acrylic Advent Wreath

PDF

Ladda ner nu

PDF

Ladda ner nu

Steg för steg

Steg 1

Step 1: Import /create design template

First, import our design template into your graphic program or make your own design. We created a design that allows you to produce two advent wreaths in one cutting step. This not only saves time, but also material. Send your design to the laser using the recommended settings.

Steg 2

Step 2: Laser process

Position the MDF into the laser and cut it out. Then put the first acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Remove the protective foil after the laser process.

Speedy-serien
Den optimala lasergraveraren och -skäraren för personalisering.

Upptäck våra lasergraverare och laserskärare

Har du frågor om applikationer eller inställningar?
Vi hjälper gärna till med allt från Air Assist till Z-offset.

Kontakta oss