Precious paper
Business cards

Step by step guide

paper business cards laser engraved

Priprema

Required material

Paper or cardboard, we used "Gmund Doubleface 925 brown, silver"

Trotec laser used
  • Speedy 300
  • 30 watts
  • 1.5 inch lens
paper-business-card-JC.zip

ZIP

Preuzmite odmah
csm_paper-business-card_8d0abced2b.png

PDF

Preuzmite odmah

Detaljni vodič

Step 1

Step 1:

Open the file "Bussines_Card" in your graphic programme, then send it to the laser. Please keep in mind that the settings for speed and laser power may vary depending on the machine used.

Laser Settings

Black (engraving):
power: 30 %, speed: 25 %, frequency: 500 dpi, air assist: on 

Red (cutting):
power: 30 %, speed: 5 %, frequency: 1000 Hz, air assist: on, Z-Offset: -2

Blue (cutting):
power: 25 %, speed: 1.5 %, frequency: 1000 Hz, air assist: on

Desert blue (cutting):
power: 40 %, speed: 2 %, fequency: 1000 Hz, air assist: on

Step 2

Tips

  • Use the 1.5 inch lens. As a result, the detailed writings become particularly beautiful.
  • If you use conventional paper and not a special cardboard, our suggestion is to reduce the laser power.
  • The combination of the vacuum table and the honeycomb table leads to the best result.
  • Feel free to adapt the design! Be creative!

Serija Speedy
Idealan laserski graver i sekač za personalizaciju.

Otkrijte laserske gravere i sekače

Da li imate pitanja o aplikacijama ili podešavanjima?
Drago nam je što možemo da vam pružimo detaljne savete, od Air Assist-a do z-pomaka.

Zatražite više informacija.

Ponosni član troGROUP Logo