Laser Engraved Fruit Images

Priprema

Required material
Used machine
  • Speedy 400, 120 watt
  • 2" lens
  • Vacuum table with acrylic cutting grid

This sample can be produced with any other machine of the Speedy laser engravers.

Important
  • Use the 2" lens for engraving. It is the right choice for all engraving that are viewed from the distance.
  • Use the acrylic cutting grid for an optimum cutting result

Detaljni vodič

Korak 1

Step 1: Import / create design template

Import our design template into your graphic program and adapt it to your needs. Send the images to the laser piece by piece.

Print settings

Process Resolution Cut line
Standard 600dpi none
Halftone Others
color -
Korak 2

Step 2: Laser process

Set the parameters like described below. The laser parameters may vary depending on the type of your laser machine and available laser power.

Laser Parameters:

Color Process Power (%) Speed (%) ppi/Hz
black engraving CO2 40 100 600
red cutting CO2 35 1.2 1000
Passes Air Assist Z-Offset Advanced
1 on 1mm High Quality
1 on - -

Info:

  • Run the engraving from bottom to top so that the dust can be perfectly exhausted
  • For the cut we used the JobControl® standard parameter for quality
  • You can download the JobControl® material parameter from www.troteclaser.com
Korak 3

Step 3: Post-processing

Clean the surface with a damp cloth and put them into a frame.

Inspirations

You can produce the images in advance and add company logos or text afterwards.

Serija Speedy
Idealan laserski graver i sekač za personalizaciju.

Otkrijte laserske gravere i sekače

Da li imate pitanja o aplikacijama ili podešavanjima?
Drago nam je što možemo da vam pružimo detaljne savete, od Air Assist-a do z-pomaka.

Kontaktirajte nas
Ponosni član troGROUP Logo