If your laser does not respond after the start command, you may need to update your firmware. Below are step-by-step instructions on how to update your firmware and solve this problem.


The first step is to request a firmware update from Trotec Technical Support: techsupport@troteclaser.com

You may install the updated firmware either via Windows Explorer or JobControl® with the step-by-step instructions below..

Step-by-step instructions for updating via Windows Explorer:

Step 1: Open the Firmware-Update .exe file in Explorer

Open the program "FirmwareUpdate.exe" by double-clicking the left mouse button.

Step 2: Start and end the update

Next click on “Connect,” and then click “Send."
Then wait until the update is finished and then press "OK."

Step by step instruction for updating via JobControl®:

Step 1: Preparation

Start JobControl®. Then switch off the laser machine and open the lid, and switch the laser machine back on.

Step 2: JobControl® settings

In JobControl® select the option “Update Firmware” under “Settings.”

Step 3: Select the Trotec Firmware-Update data file

Select the requested Trotec update data file with the command “Load”

Step 4: Start and end the update

Select the command “Send” and wait until the update is finished.
Caution: Do not press the button “Cancel” during the update.
Do not operate the laser machine during the firmware update.
End the update with "OK."

Step 5: After the firmware update

Switch off the laser machine.
Close the lid.
Switch on the machine.

--> The laser machine references the axes.

Start JobControl® and reconnect to the laser machine.

Check the update

Click on "Settings" and on "Information"
If you receive an error message, carry out the update once again.

Still having problems?

Please contact our technical support. We will take care of the problem and find a solution quickly.

The US: +1-866-226-8505
Canada: +1-866-987-6328
The UK: +44-0-191-4188110
Australia: +61-2-4647-7600
All other countries: Please see our Shopfinder

Service hotline e-mail: 


Isprobajte naše lasere u akciji! Zahtevaj demo odmah
Zahtevaj demo odmah