Speedy serije: CO2 mašine za lasersko graviranje i sečenje za formate do 1016 x 610 mm
⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂, Flexx ili Fiber laser |
---|---|
Radna površina: | 610 x 305 do 1016 x 610 mm |
Maks. visina predmeta: | 125 - 305 mm |
Snaga lasera: | 20 - 120 W |
SP serije: CO₂ mašine za lasersko sečenje za materijale velikog formata.
⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
Tip lasera: | CO₂ laser |
---|---|
Radna površina: | 1245 x 710 do 3250 x 3210 mm |
Maks. visina predmeta: | 50 - 112 mm |
Snaga lasera: | 40 - 400 W |
SpeedMarker serije: Industrijsko, brzo lasersko obeležavanje za označavanje metala i plastike.
⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂ ili Fiber laser |
---|---|
Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
Maks. visina predmeta: | 250 - 764 mm |
Snaga lasera: | 20 - 100 W/20W MOPA |
Use our template and instructions to make this creative desk pen holder.
We used engraving materials available at Trotec. (Browse product range: www.trotec-materials.com.)
For this sample you can use any laser machine from the Speedy laser engraver series.
Check the thickness of the material before you start and adapt the kerf if necessary.
Make your own design or use our template. (You can also adjust our template to meet your requirements.)
You can adapt the diameter of the holes depending on the pens you want to insert.
Send the job to the laser using the following print settings:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
color | enhanced geometries, inner geometries first |
Adjust the parameter settings in your laser software. The suggested parameters can differ depending on the machine used and the laser power:
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
Creasing: red | cut CO2 | 7 | 1 | 1000 |
Cutting: red | cut CO2 | 100 | 1.6 | 1000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | - | - |
1 | on | - | - |
We used the standard parameters from JobControl® for 5 mm solid maple.
Remove the wood from the laser and clean it with a damp cloth. To assemble it, simply put together the two parts.
Now this desk accessory is ready to be sold to your customers and filled with pens or business cards.