Speedy serije: CO2 mašine za lasersko graviranje i sečenje za formate do 1016 x 610 mm
⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂, Flexx ili Fiber laser |
---|---|
Radna površina: | 610 x 305 do 1016 x 610 mm |
Maks. visina predmeta: | 125 - 305 mm |
Snaga lasera: | 20 - 120 W |
SP serije: CO₂ mašine za lasersko sečenje za materijale velikog formata.
⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
Tip lasera: | CO₂ laser |
---|---|
Radna površina: | 1245 x 710 do 3250 x 3210 mm |
Maks. visina predmeta: | 50 - 112 mm |
Snaga lasera: | 40 - 400 W |
SpeedMarker serije: Industrijsko, brzo lasersko obeležavanje za označavanje metala i plastike.
⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂ ili Fiber laser |
---|---|
Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
Maks. visina predmeta: | 250 - 764 mm |
Snaga lasera: | 20 - 100 W/20W MOPA |
Open the JobControl laser software and click the "Start/Pause" button to stop a running job.
Press the "Start/Pause" button directly on the laser machine's control panel to stop the current job.
Pausing the current laser job offers many advantages. You can open the cover and manually move the laser head or axes. You can e.g. check the quality of the engraving or the cut. If you are pleased with the result and want to continue the job, click or press the "Start/Pause" button again. The laser then moves to the original position, where it was stopped, and continues the job.
Go to the JobControl software and click on the "Stop" button in the lower right area of the screen.
If you open the cover of the laser during processing, the safety circuit is interrupted and the job is canceled.
If you stop a job by clicking or pressing the "Stop" button, the job must be restarted from the beginning. It is not possible to continue the job at the point that it was stopped.
Do you have further questions about the control and operation of your laser machine? Then please contact our technical support. We would be happy to help you.