Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂, Flexx ili Fiber laser |
---|---|
Radna površina: | 610 x 305 do 1016 x 610 mm |
Maks. visina predmeta: | 125 - 305 mm |
Snaga lasera: | 20 - 120 W |
SP series: CO2 laser cutter for large-format materials.
⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
Tip lasera: | CO₂ laser |
---|---|
Radna površina: | 1245 x 710 do 3250 x 3210 mm |
Maks. visina predmeta: | 50 - 112 mm |
Snaga lasera: | 40 - 400 W |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂ ili Fiber laser |
---|---|
Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
Maks. visina predmeta: | 250 - 764 mm |
Snaga lasera: | 20 - 100 W/20W MOPA |
When a standard laser workstation cannot meet the needs of your laser marking requirements, our experts at Trotec Laser Automation are the correct point of contact. They guide you in three steps from the evaluation phase up to the installation and implementation of the special laser machine.
Here you can find an overview of realised projects.
First we take a look at the customers` requirements, needs and expectations. Then we analyze following:
Based on the requirements, we provide a performance and specification sheet and a draft of the laser machine. Our experts additionally offer an alternative design in order to find the best possible solution.
From the first day on, we emphasize tight cooperation with the customer. After a detailed kick-off meeting, we have regular meetings to be sure that the project meets the customers` requirements. At the end of the project, the machine will be installed together with the customer.
You need a special laser machine for your laser marking, laser engraving or laser cutting process?
Our experts of Trotec Laser Automation are pleased to inform you about your possibilities.