Name tags made of different TroLase engraving materials

When using TroLase materials and a Trotec laser, it is possible to make a wide range of different name tags. You can find out how to make these below.
Engraving materials are available at Trotec. Browse our product line at www.trotec-materials.com

Preparation

Required material:

TroLase Purple/White 1,6 mm L582-206
TroLase Burgundy/White 1,6 mm L622-206
TroLase Light grey/White 1,6 mm L322-206
Magnet for name tags
Materials available at Trotec
Superglue

Used machine:

Speedy 360, 80 Watts with 1.5" lens

For this sample you can use any laser machine from the Speedy laser engraver series.

Important:

Due to the delicate design we used the 1.5" lens
Use the acrylic cutting grid or the aluminum cutting grid table. It reduces the beam reflections to a minimum.

See the complete production process in this video turorial:

Korak po korak

Step 1: Import /create design template

Import our design template into your graphic program and adapt it according to your requirements.

Important:

Our template has been designed for 1.6 mm material. If you are using other types of engraving materials, you will need to adapt the parameters.

Print settings:

Process mode	Resolution	Cut line
Standard	500 dpi	none

Halftone	Others
Color	enhanced geometries, inner geometries first

Step 2: Laser process

Position the wood sheet into your laser and cover the rest of the table to maximize the exhaust power. Engrave and cut the various parts.

Laser Parameters

Color	Process	Power (%)	Speed (%)	ppi/Hz
red	cut CO₂	40	0.7	1000
black	engrave CO₂	35	60	500

Passes	Air Assist	Z-Offset	Advanced
1	on	-	-
1	on	-	-

Tip:

We used the standard laser parameters from JobControl^® optimized for speed
The material parameters of JobControl^® can be downloaded from www.troteclaser.com
Start the engraving from the bottom This reduces the cleaning.

Step 3: Post-processing

As soon as all parts have been engraved and cut, you can assemble them using super glue. Finally, affix the magnet or pin on the back of the name tag. Now it's ready!