Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Graviranje | ⚫ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂, Flexx ili Fiber laser |
---|---|
Radna površina: | 610 x 305 do 1016 x 610 mm |
Maks. visina predmeta: | 125 - 305 mm |
Snaga lasera: | 20 - 120 W |
SP series: CO2 laser cutter for large-format materials.
⚫ Graviranje | ⚫ Sječenje | ⎯ Markiranje |
Tip lasera: | CO₂ laser |
---|---|
Radna površina: | 1245 x 710 do 3250 x 3210 mm |
Maks. visina predmeta: | 50 - 112 mm |
Snaga lasera: | 40 - 400 W |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Graviranje | ⎯ Sječenje | ⚫ Markiranje |
Tip lasera: | CO₂ ili Fiber laser |
---|---|
Maks. radno područje: | 190 x 190 do 1300 x 450 mm |
Maks. visina predmeta: | 250 - 764 mm |
Snaga lasera: | 20 - 100 W/20W MOPA |
Use our template below to make this counter display. Just adapt the dimensions of your pens and start production.
The engraving materials are available at Trotec. (Browse our product range for more information.)
For this sample you can use a Speedy 360 or Speedy 400 laser machine from the Speedy laser engraver series.
Import our design into your graphic program and change it according to your requirements.
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Black & White |
Cut all parts our to MDF using the acrylic cutting grid table. Next, cut and engrave the acrylic on the acrylic cutting grid table or the acrylic slat cutting table to avoid back reflections on the material. Finally, cut the letters out of TroLase Lights.
Material | Color | Process | Power (%) | Speed (%) |
---|---|---|---|---|
MDF | red | Cut CO2 | 100 | 0.5 |
Acrylic | red | Cut CO2 | 95 | 1 |
TroLase Lights | red | Cut CO2 | 17 | 2 |
ppi/Hz | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
1000 | 1 | on | - | - |
1000 | 1 | off | - | - |
1000 | 1 | off | - | - |
Clean all parts using a damp cloth. Glue the two MDF parts together and add the acrylic piece on top. Make sure that all pieces are positioned precisely on top of each other. Use an angle stop if necessary to avoid shifting of the parts. Next, glue the letters made of TroLase Lights on the acrylic. Finally, insert the stands into the slots at the back of the display.
Instead of the adhesive letters, you can directly engrave on the acrylic.